The cutting blade disc of the NAC RLM1800G2-T robotic mower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece disc with blades for a mowing robot, a replacement for the original, restoring the efficiency of the machine.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
The mowing robot in my garden has difficult working conditions ;) From time to time it smashes the blade discs on a root, curb or a stick, or simply breaks the blade from the socket.
Instead of buying a new blade disc from NAC, below is a photo of the original.

I designed a replacement with two elements:
- central wheel mounted on the axle,
- ring with blade attachment.
Now if your mower hits something hard, just print and replace the outer ring instead of the entire disc.
The elements are connected using M4 10mm screws (6 pcs), the blades can be screwed directly into the holes or M4 rivet nuts attached with a hot soldering iron can be used. (it all depends on the blade and the mounting screw you have)
I tested the solution throughout the season, the disc is stably mounted and rotates without excessive vibrations.

I am also uploading the .f3d file. If you use different blades or a different model, you probably only need to make a few adjustments.
