Linear Bearings - LM8UU - RJ4JP-01-08
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.43 net (excluding VAT)
For file: rj4jp-01-08___LM8UU.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 31.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar…
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 183
- Makes
- 3
- Views
- 822
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Após algumas pesquisas decidi-me por fazer a minha própria peça.
O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm.
Basta fazer o slicing com as definições a baixo e deve sair tal como a minha.
Vou mudar pois os rolamentos fazem muito barulho e tenho algumas imperfeições nas peças.
Para lubrificar por o que li usa-se lubrificante a base de teflon ou silicone.
Basicamente aquele produto que se vende para colocar nos tablier dos automóveis para dar brilho.
Estou a usar PLA, em breve vai ser montado e vou fazer vários testes
Se gostares e queres ajudar clica no link https://goo.gl/UFUtju ou em "Tip Designer"do lado esquerdo, e contribui.
English Version (Google translate)
After some research decided to do for my own piece.
The STL file already has a tolerance of 0.2 to stick to the inner diameter of 8mm and 15mm external.
Just do slicing with the settings down and must leave as mine.
I will change because the bearings make a lot of noise and have some imperfections in the parts.
To lubricate by what I read is used lubricant base Teflon or silicone.
Basically one product that sells to put on car dashboard to shine.
I am using PLA, soon will be mounted and will do various tests
If you like and want to help click on the link https://goo.gl/UFUtju or "Tip Designer" on the left, and contribute.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3 Hephestos
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
0%
Notes:
Outline / perimeter Shells = 2
Outline direction = Inside / Out
Outline overlap = 0%
Bottom layers = 0
Top layers = 0
Category: 3D Printer Parts