Mr Fancy McFancy for the Qube 500
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To turn your computer into a fancy boi.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 13
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
To make your computer fancier than your enemies and friends. I haven’t printed it so that has to be left to your better judgement, however I am quite sure a standard 20% infill should work, for the top hat a lower infill like 5 or 8% should work as well.
All pieces are already in printing orientation. Designed to print without supports.
Assembling:
The eye with monocle is assembled by using the alignment lines on both sides of the eyeball and gluing the pieces together, although the overhang is there, it is quite small and should print fine. To insert glue the black part as well, although it may require scaling it a little lower. Do the same with the other eye.
The moustache requires no assembly.
The hat is a 3mf so you can scale the pieces independently, the 2 largest parts are to be scaled the same keeping the connector in the middle of the flatter piece. After printing, the pieces are simply assembled by putting glue in the pentagon and putting the larger piece on top.