1 / 2
Dell WD19 Thunderbolt Dock Mount for IKEA Signum Cable Channel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An under-table mount for the WD19-[TB]S thunderbolt dock that clips into the IKEA Signum cable channel.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 0
- Views
- 1,119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Assembly that screws into the Thunderbolt dock and can be clipped into a Signum cable channel.
Allows for easy installation and removal + simple cable routing directly into the cable channel above.
The part can be mounted in any orientation on the dock, allowing for it to be aligned with the cable channel or be mounted orthogonally to it.
Printing
Print both parts on the chamfered sides. The dock part as-is and the cable channel clip on its side.
Printing required no supports.
Required hardware
- 2*M2.5x8 cap head screws (for the dock)
M2.5x10 will very likely work as well (see the description of my other model) - 4*M3x10 screws (any head shape) for connecting the two parts
- 4*M3 square nut (e.g. DIN562) for connecting the two parts
You might be able to use hex nuts as well; however, for M3 I recommend square nuts in general