1 / 3
Filament Sample Coin with NFC
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple filament sample with a radial gradient to show transparency and a cavity to embed a NFC tag.
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 61
- Makes
- 1
- Views
- 519
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple filament sample in the form of a coin with a transparency gradient ring and a space to embed a 1" (or 25mm) NFC tag that you could link to a reorder site, your print shop, etc.
The transparency test layers are 0, 0.2, 0.4, 0.6, 0.8, 1, 1.2, 1.4, 1.6, 1.8, 2, and 2.2 mm in thickness.
Here's a link to the NFC tag I used:
https://a.co/d/7oDPLHf
If you're printing at 0.2mm (which is what I'd recommend since each layer increases by 0.2 anyway), pause the print at layer 5 to add the NFC tag.