1 / 6
SOVOL SV01 BLTouch Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is my initial attempt at a stronger 3d printed BLTouch mount for the SOVOL SV01 printer. This is designed to…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 86
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my initial attempt at a stronger 3d printed BLTouch mount for the SOVOL SV01 printer. This is designed to mount the BLTouch in the same location as the SOVOL metal mount so the stock BLTouch firmware and offsets should work without a problem. I suggest printing with at least 3 outer walls/shells and a decent amount of infill for rigidity.
Parts Needed:
- BLTouch
- 2@ M3 x 8mm Bolt(for carriage)
- 2@ M3 x 5mm Bolt(for BLTouch)
Print Settings
Printer:
SOVOL SV01
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%+
Category: 3D Printer Parts