1 / 4
Raspberry Pi 3 case for 2020 / 2040 extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a slim Raspberry Pi case to attach to my Folger Tech FT-5 and fit within the rear control box. Mount with…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a slim Raspberry Pi case to attach to my Folger Tech FT-5 and fit within the rear control box. Mount with short 5mm bolts and t-nuts.
Note:
Spacing from the center of the bolt holes to the start of the pi case itself is 20mm, so there should be roughly a 10mm gap between the case and the 2020 extrusion.
Print Settings
Printer:
Folger Tech FT-5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Whatever you want
Notes:
Print with flat sides down on the build plate, easy enough.
Category: 3D Printer Accessories