1 / 8
Star Wars Legacy Run — image 1
1 / 8

Star Wars Legacy Run

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.37 – €0.46 net (excluding VAT)

For file: legacy run-1_10000_0.4n_0.1mm_PLA_MK3S_34m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.42 excluding VAT (range midpoint).

Weight reported by the author
2 g
Print time reported by the author
34.2 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Model of the Legacy Run, a Class A modular freight transport from Star Wars: The High Republic

Rating
0 / 5
Likes
23
Downloads
130
Makes
0
Views
658
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution

The Legacy Run is a Class A modular freight transport from the High Republic Era. The inciting incident of the novel Light of the Jedi revolved around the Legacy Run.

The model is 194mm long, 80mm wide, and 47mm tall. The scale is about 1:2,000 by my estimation, but this ship does not have any canon dimensions yet. To illustrate my estimated size, the final photo shows it alongside a MPO 1400 Purrgil-class Star Cruiser.

The model is also available at 1:10,000 scale. This version was modified to eliminate thin parts. It is 36mm long, 15mm wide, and 9mm tall.

The Legacy Run is based on unused concept art from The Force Awakens for Han Solo's freighter.

Print Instructions

Printed at 0.2mm layer height. Requires supports on buildplate.

The antenna at the front is printed seperatly and glued to the model.

The 1:10,000 scale version was printed at 0.1mm layer height and requires supports.

 

For Light and Life

 

 

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

 

[UPDATE 2023-10-06] Added 1:10,000 scale version

Tags