1 / 3
Hydrant - water meter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hydrant as a woter meter box PLA, 0.8
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PLA, 0.8mm
I split 'Hydrant - body' into more parts to reduce supports and be able to put on the hydrant. Check the photo…
- The middle part of the ‘body’ is printed as a vase and connected with glue
‘Hydrant - top extension’ is not needed if you don't have a wifi module
- I had to heat and a little bend this part to fit the digital meter part
My water meter is not horizontal, so the side extension for the pipe is not horizontal (different Z position). But this published model has the side pipes at the same height.