Eccentric quick-release fastener for scroll saw DS460
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.55 – €0.67 net (excluding VAT)
For file: ds460_eccenterlock-nut_0.15mm_PETG_MK3S_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 48 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Exchanging the release mechanism makes changing the blades and switching between holes so much faster!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 764
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found releasing and fastening blades on my scroll saw very annoying, when using the original lock nut: Rotating the nut takes ages and when fastening the blade, you always have to find the right position to achieve the correct tension on the blade...
So I designed this eccentric fastener for my Proxxon DS460 sroll saw. Now releasing and fastening the blade takes just a blink of an eye:
|  |
Also, if you do not rotate the fastener, the tension when pushing down the lever is always the same. I am so happy with the result!
The lever should also work for any other scroll saw (and any other tool) that has a M6 thread at the fastener.
Print Settings
I recommend printing in PETG using 3 or more perimeters for increased strength. I did use “army green” filament to match the color of the DS460.
To achieve the best result, print the lever lying on its side and using a 0.3mm layer height. Although this means that you will need a local support between the "wings", this will result in a very nice surface you will enjoy to touch:
The lock nut should be printed in 0.15mm layer height.
Additional material required:
- 6.4 x 30mm washer
- M6 x 30mm countersunk screw
- 2pcs M6 nut
Design and Source Code
The fastener has been designed using OpenSCAD. I have provided the source code for download, so you can adjust the design to your needs.
Happy printing!
If you like this design, then please leave a like and also post a photo in the comments. Also check out my other designs.