Sv06 Spool holder for rodgerquin upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OEM Spool holder for the SV06. This allows you to use @rodgerquin spool holder on any printer that feeds from the top
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
OEM Spool holder for the SV06. This allows you to use @rodgerquin spool holder on any printer that feeds from the top found here https://www.printables.com/model/409684-spool-holder-for-sovol-sv06-3d-printer
The nut is tight I recommend putting the OEM spool holder on first then rodgers model on top after using superlube between the OEM part and the two parts from his model that rub together. When putting the shroud over the assembly when you get it tight use a small flat head screwdriver against the two inner part and spinning the outer part to make it flush it is tight but needed in order to stay together do not change values.
In this file is the OEM split into 4 different files #1 - the nut, #2 - OEM with no changes, #3 - OEM Solid, #4 OEM Solid and split in half with connectors (Printing this way removes supports and is stronger with layer lines going against the break point then with it.