1 / 2
Graveyard Lich (Filament Painting) - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 47
- Makes
- 0
- Views
- 285
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Graveyard Lich (Filament Painting) - HueForge
Printing instructions:
Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.
You can use same filaments as I did, or you can experiment with your own.
Don't forget to upload a make!
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Blue Gray Transmission Distance: 3
- PLA BambuLab Basic Beige Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
- Start with Black
- At layer #6 (0.44mm) swap to Blue Gray
- At layer #15 (0.8mm) swap to Beige
- At layer #32 (1.48mm) swap to Jade White for the rest.