1 / 5
Spray Bottle Holder - use with 10mm rod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use any 10mm rod cut to length of your choice
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 92
- Makes
- 2
- Views
- 410
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- print 1x left side and 1x right side
- cut any 10mm rod to length of your choice
- if needed, use glue to secure the rod on both ends
- to fit use 4pcs of 4mm self tapping countersunk screws
Printing instructions:
- max layer height 0.2mm to keep the overhangs clean
- 4 perimeters
- no supports at 0.2mm layer height needed
- USE brim if printing from PLA to keep bed adhesion OK
Version history:
v1.0
6.10.2023
- initial release