Compact iPhone Magsafe Kickstand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pocketable holder for the Apple Magsafe charger with a little kickstand.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 89
- Makes
- 3
- Views
- 721
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
A pocketable holder for the Apple Magsafe charger (not tested with non-Apple Magsafe) with a little kickstand.
This is a little minimalist kickstand holder for the Apple magsafe charger. It will prop your phone up horizontally on a desktop and collapse into a compact puck when not in use.
Place the model on the bed in your slicer facing up. Add a print pause between the top layer of the kickstand and the overlapping layer (there is a 0.25mm gap).
Before printing, prepare a piece of tape or self adhesive label (I just cut a rectangle from an Avery mailing label sheet) that is approximately 18mm x 55mm. The print-in-place nature of the design requires a printer pause to be added in your slicer between the kickstand and the overlapping layer.
When your printer pauses, align the “sticker” you made earlier with the top layer of the kickstand and make sure it is well adhered with no loose edges. Continue the print.