1 / 1
Slurm! - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slurm logo for Fry's favourite beverage. It's highly addictive!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 109
- Makes
- 0
- Views
- 581
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA PolyLite Pro Pink Transmission Distance: 3
PLA PolyTerra Lime Green Transmission Distance: 1.5
PLA JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Pink
At layer #18 (1.52mm) swap to Lime Green
At layer #23 (1.92mm) swap to White for the rest.