1 / 1
Bob's Burgers Logo - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Lava Red
At layer #12 (1.04mm) swap to Lemon Yellow for the rest.