1 / 2
Beast Boardgame - Collection/Remix of Beasts — image 1
1 / 2

Beast Boardgame - Collection/Remix of Beasts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A collection of models to replace the cardboard standees in Beast

Rating
0 / 5
Likes
39
Downloads
424
Makes
0
Views
2,027
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a carefully curated remix to replace the cardboard standees in the hidden movement boardgame Beast (https://boardgamegeek.com/boardgame/281549/beast).

If you're wanting Watchtowers for this game please check out my other remix https://www.printables.com/model/605109-wood-watchtower (you'll need 6x).

Notes

  • Printed at 0.1mm layer for detail, infill is usually inconsequential, and wall width could be increased.
  • If you have difficulty printing miniatures on your printer scroll to the bottom of the description for a possible solution.
  • The sizes here took some time to get right. You might find you want to increase them but I remade these STLs from memory of what sizes I used. Given the material required reprints shouldn't be terribly costly.
  • My solution for Mara is arguably pretty weird. She isn't a harpy so feathered wings didn't match her. I also struggled to find a vampire that works so I blended a couple things together and her shoulders look weird. At the scale I have her printing it isn't obvious though. Also: Her wings will print pretty thin, see the next bullet point about primer.
  • I coated all models with multiple coats of Vallejo surface primer to add a rubbery coat and hopefully increase durability/density.

Print Counts:

Raaga

1x Raaga.stl

1x Basalisk1.stl

1x Basalisk2.stl

Mara

1x Mara.stl

2x Banshee.stl

Hogbad

1x Hogbad.stl

3x WarPig.stl

Bolgin

1x Bolgin.stl

3x Polyp.stl

Fangrir

1x Fangrir.stl

3x Wolf.stl

Esmeria

1x Esmeria.stl

2x Changeling.stl

 

Tree Support Help:

I had a lot of issues with Cura supports - the way it typically handles tree supports results in the entire piece being enveloped with the tree trunk and ultimately breaks the legs of most models while removing them. I found this slightly older and custom compiled version of Cura to do tree supports MUCH better: https://github.com/ThomasRahm/CuraEngine/

Tags