Aladdinbox Skycube / Instone Mini / Universal Extruder Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This extruder replaces the Aladdinbox Skycube / Instone Mini or the Monoprice Mini Select extruder. Why change it?…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This extruder replaces the Aladdinbox Skycube / Instone Mini or the Monoprice Mini Select extruder.
Why change it? This one features an extra wide funnel shaped hole into the bowden fitting, so you can always get the filament in the first time instead of bumping the roof.
A universal backplate adapter takes the place of the plastic wall this mounts to, and makes it possible to mount this directly on any motor, so it's a universal extruder. Scale the adapter in the Z direction to make it thick enough so the filament path is in the right spot on your motor gear.
Material required:
- 3 M3x20 screws for top and bottom corner (could be longer if you want)
- 1 M3x6 screw for bottom corner under lever
- 1 M6 nut to mount the bowden tube fitting
- 1 spring (Original should work but I used an Ender 3 bed spring)
- 604ZZ U-curved bearing
Print Settings
Printer:
Voron 2.4
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
Filaments.ca PLABlack
Notes:
Print with 3 walls for strength.
The bearing cover has an unsupported circular bridge. SuperSlicer can handle it if you turn on "No perimeters on bridge areas", otherwise use support for this part.Category: 3D Printer Extruders