Jura Ena Micro 9, brew unit, geared part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had a broken Jura Ena 9 machine that needed to be cleaned, and I noticed a broken part. This is it.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 192
- Makes
- 0
- Views
- 769
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
It was a tiny part with gears inside the brew unit that was broken. The part wasn't possible to buy without buying the whole brew unit and it would have cost aprox 200$.
I designed it in Fusion 360. Tried to make a copy as close as possible to the original part using only a caliper.
Print:
I printed it at an 45 degree angle to make the layers as long as possible, and with only the necessary supports.
Assembly:
First I heated the M2 threaded inserts and put them in the tubes on “part2”, put the gears in place and fastened the two parts with 3mm M2 bolts.
To find the part, follow this instruction to step 18.