1 / 6
Breakout Box for Gotek Floppy Drive Emulator with 1.3" OLED & Trackball (FlashFloppy)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New breakout box that incorporates the larger 1.3" OLED screen and a Trackball
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 45
- Makes
- 0
- Views
- 746
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
New breakout box that incorporates the larger 1.3" OLED screen and a Trackball which is now supported by the latest version of FlashFloppy v2+ (https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#blackberry-trackball). Recommend trackball installed as up/down movement
Few designs:
- Amiga 1200 - designed to fit snug on top of the case with air vent "teeth" to stop the box moving up/down (can easily move left and right). Also moulded at back to follow the shape of the A1200 case allowing the wires to be routed at the back of the case. Wires could also be fed through the vents on top of the case.
- Amiga 500 - similar to the A1200 design with the vent teeth to secure but just a simple opening at the back for the wires.
- Atari ST - no teeth but a front lip to secure in place
- Generic - just the standard case with no teeth so will need another means to secure
*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+