Printed Shelf Mounting Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.32 – €5.28 net (excluding VAT)
For file: Shelf Bracket_0.4n_0.2mm_PLA_MK3S_4h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.80 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 4.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
End brackets to support wall shelf of various lengths and widths. Easy to print in any color to match decor and design.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this printable wall shelf bracket similar in size and function to the metal shelf brackets available from Ikea.
Print file and maker file attached are for prints using PLA, which works very well and is more rigid that PETG. Printing in PETG may offer some other advantages if desired.
I haven't tested for holding strength or load bearing of the shelf. I suggest using these brackets for lighter projects to start until you have more confidence in their capacity. In mounting to a wall, being sure the screws are positioned into a wall stud is always a stronger choice.
See the attached pictures that includes one of how the brackets and shelf should be oriented (sort of like bookends above the shelf, rather than brackets beneath the shelf).
Hope these are helpful for your storage and organization needs! Comments, Likes and remix suggestions welcome!!