Water level indicator for self watering pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert any ordinary pot to a self watering pot.
- Rating
- 4 / 5
- Likes
- 80
- Downloads
- 209
- Makes
- 1
- Views
- 3,521
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Self watering pots are bloody expensive. By using this simple water level indicator and some clay balls you can convert any ordinary pot to a self watering pot.
BOM:
- a pot
- some clay balls
- some 25 mm diameter standard plastic tube (used by electricians)
- one red straw
ASSEMBLY:
- print the parts
- cut the 25 mm plastic tube to the required length
- cut the bottom of the 25 mm plastic tube to zigzag to allow water flow underneath the buoy
- push the plastic tube into the bottom cage and level its bottom with the cage's bottom
- pull the "top corner w scale" to the top of the plastic tube
- push the bouy and the red staw together (you may also glue them but it's not neccessary)
- put the buoy into the tube
- stand the entire assembled appliance to the corner of the pot and re-level the top/bottom parts again
- now fill the pot with clay balls, plant your plant into the pot
- start filling the pot with water by oozing the water at the root of the plant
- fill the water until the straw on the indicator will not exceed the max. level