Small sprinkler for Bonsai or small pots
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This irrigation system sprinkler is made for 4 mm tube, you can add two way water flow printing it in a FDM printer
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 1
- Views
- 841
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This irrigation system sprinkler is made for small pots or Bonsai, it disperse water in an small arch. You can add two way water flow (arch and down) printing it in a FDM printer if you change the printing orientation 180º on the Z axis. This way the print has micro grooves that also carries the water in a downward direction. For a regular arch dispersion, print it on its base for FDM or in a SLA printer. This model fits in a 4mm. irrigation tube, but you can scale to fit your irrigation system. It has on it base two holes for anchoring with barbecue sticks or metal wire; you can also tie it to bigger sticks, pots, supports or trellis if you need to. You can adjust the volume of the water flow moving the tube up or down on its anchor point, move it up to increase water flow or down to decrease it. Important: Be sure that the vertical groove is free of printing debris, it's important for the water to flow freely in this part.