1 / 2
Voron trident SAOC
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stupid Amount Of Cooling An auxiliary fan mod for the voron trident to print PLA at full speed using 12032 fans.
- Rating
- 5 / 5
- Likes
- 124
- Downloads
- 335
- Makes
- 3
- Views
- 6,333
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stupid Amount Of Cooling
This auxiliary fan mod lets me print PLA with a much higher speed on my voron trident. It was designed around gdstime 12032 fans.
The fans are held in place using M3*6 BHCS which are screwed into heat set inserts which are melted into the fan body. The fan holder needs 2 M5*6 screws. The slots in the fan holder are 20mm long so this mod can also be used with the longest of melt zones.
The slots have a sacrificial bridge which needs to be removed before use.