1 / 1
Diy flash drive case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a Case for usb diy flash drives
- Rating
- 2 / 5
- Likes
- 31
- Downloads
- 242
- Makes
- 3
- Views
- 1,096
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Diy flash drive case. The opening for the usb plug might need opening up a little depending on your printer. the lid is glued with some 5 min epoxy The board is a nice tight fit so be careful getting it in.
infill 25%
layer 0.20mm