EM Calibration Cube (30x30x30)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A calibration cube with features such as overhangs, 45/90 corners, bridges, clearances, support material, text, etc.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 1,216
- Makes
- 2
- Views
- 2,779
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A calibration cube inspired by my logo with features such as overhangs, 45/90 corners, bridges, clearances, support material, text, etc.
Several models available for the various clearances clearly marked with text at the top of the part.
Cube corners can be used to calibrate for pressure advance, there are also 45 degree corners to test for even sharper corners.
Generate support under the middle of the ‘M’ - be sure not to enable brim so that the first layers of the interior / exterior part do not get fused together.
Dimensions of exterior part are 30mm x 30mm x 30mm
Print at suggested layer height of 0.2mm.