Mini-lathe PVC pipe adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows a mini-lathe tailstock center to hold a 1 inch PVC pipe.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 1
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an adapter for holding a 1 inch internal-diameter PVC pipe into my mini-lathe. I wanted to knurl the plastic pipe for use as an exerciser handle. One side was clamped internally with a small three-jaw chuck; this adapter was put into the other end and a tailstock center was then used on the adapter. Printed from Overture PLA with 6 outer perimeters and 5% infill.
The stl file is included; if you need to adapt for a different size pipe the model can be accessed at https://www.tinkercad.com/things/2L5QyLIEhyK?sharecode=ThIG6cetdygONYEEd8RPtCkgxwkakioqorjX1EPld_0