Slim Riser for Camera Mount for Prusa Mini to place besides Raspberry Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small riser to be able to use the camera mount from Seabird HH and the great RPi case from Joe
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 32
- Makes
- 0
- Views
- 692
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a neat little riser to be able to use the Prusa Mini Raspberry Pi Camera Mount from Seabird HH and the great and highly compact Prusa MINI Raspberry Pi Case from Joe.
Normally these two parts cannot be placed besides each other. Even with the riser it is a tight fit but it works (the riser has to be mounted first, then the RPi case).
The riser can be mounted with a M4 screw and T-Nut (I used M4x16) and the top screw is a M3 screw for the Raspberry Pi Camera Mount System. The M3 is secured with a ruthex Brass insert (4mm diameter in the plastic). If there is demand I can surely release a version with a smaller hole so that anybody can cut their own threads.