Palette Garage Tube
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.37 – €0.45 net (excluding VAT)
For file: Palette Garage-joint_0.4n_0.2mm_PLA_MK4_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 27.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A sturdier tube for a painters palette garage
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife uses a tube called a palette garage to put her oil paint in when she is not using it or traveling. The tube it comes with is clear plastic that is, unfortunately, a bit fragile and will crack over time requiring replacement. Instead of her having to get a commercial replacement tube I designed this tube that will use the existing end caps but is sturdier.
Some painters want to always put the same color at the same end of the tube. One of the body parts has a colored strip on one end. If you don't need to mark an end feel free to print two of the plain end.
I printed this on a Prusa MK4 using 0.2mm layer height, 0.4mm nozzle, and Voxel Blue and Voxel Cool White PLA+. The body tubes may need a brim to improve adhesion and stability depending on your printer. I didn't need one but YMMV.