1 / 3
Breadboard Mount with Power Terminals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simplifies powering the rails on a breadboard. Separate connections per rail but has a bonded ground.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 67
- Makes
- 1
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Public Domain
Update 10/9/23 - I added knobs that have a “+” or “-” indicator on them. This may be helpful if you're not able to print them in red and black.
This breadboard holder has power for both rails which can be powered with different voltages if needed. They share a ground for stability.
Build instructions
- Layer height doesn't matter
- Add supports on build plate unless your bridging is really good.
- I printed in PLA but doesn't really matter.
I used M3 screws for the terminals with washers underneath to hold the wires. They screw right into the red and black knobs.