Sovol SV07 Plus Webcam Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Webcam mount for the Sovol SV07 Plus
- Rating
- 4.25 / 5
- Likes
- 34
- Downloads
- 322
- Makes
- 4
- Views
- 1,900
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Side webcam mount for the SV07 Plus. Mount attaches to the right (touchscreen side) attachment point of the Z-axis rails, using the existing M5 bolts.
Printed in PLA with 4 walls and 40% infill to improve stiffness due to the cantilever required to ensure no collision with hotend on X-gantry.
No supports required using print orientation with the long camera arm on the plate (see screenshot for proper orientation to print without any support).
Unlike the webcam mount for the SV07 by DrR00T90, this is mounted on the side of the printer due to the larger bed of the SV07 Plus leaving little/no room for the webcam to be mounted to the touchscreen mount.