Anycubic Kobra Go Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw some other filament guides on here and wanted to make something similar. This is what I came up with. It's…
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 186
- Makes
- 1
- Views
- 767
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I saw some other filament guides on here and wanted to make something similar. This is what I came up with. It's actually my first attempt at a print-in-place moving part and it worked, so that's pretty sweet. It clips onto the spool holder. The little hole is sized to press in a piece of PTFE tubing. That head piece pivots to reduce friction/pressure even more. I've included a screenshot of the orientation to print it.
Note: I painted inside the small hole to stop supports from being put in there as it's not necessary. The hole is a very snug fit for the PTFE tubing so I printed it at a 0.1mm layer height for extra smoothness.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra Go
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
5%
Filament: iBoss PLA+ White Post-Printing =============
After removing the support material (craft blade for the rotating part was needed for mine), cut a piece of PTFE tubing about 7.5mm long and press it into the small hole. I pressed it in a tad by hand then put it tube down onto my desk to press it in the rest of the way.
Category: 3D Printer Accessories