1 / 2
Lid Clip for SmartStore Box classic 31
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple round lid clip for the smartstore classic 31 box
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 114
- Makes
- 2
- Views
- 534
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Background and idea
I use a SmartStore 31 box as a storage and drying box for my filament. The SmartSore box only has clips on the short side. The clips I designed seal the lid better on the long side. I use two to four clips on each long side.
Just guide the clip under the edge of the box and press it sideways over the lid.
The build of my filament drybox for 8 to 10 spools: https://www.printables.com/model/615848-filament-drybox-for-8-to-10-spools
Printing recommendations
- PETG recommended, because it bends a bit. – I used Prusament PETG Clear. It fits perfectly to the color of the box.
- Nozzle diameter 0.6mm (or 0.4mm) – I used 0.6mm BondTech CHT nozzle.
- Layer hight 0.32mm (or 0.2mm)
- Perimeters 3 – the perimeters should fill up the whole clip
- No Infill
- No supports