Modular leg elevation 80x80mm surface
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple modular system for raising a table or bed. Combine the parts to achieve your desired height.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Combine the suitable modules to obtain the desired height. Take the basic module and add the desired middle parts before you finish the build with an End piece. The circles are to prevent the leg from slipping on the elevation.
For a secure hold, use M4x20 cylinder head screws to secure the elements. To do this, screw the elements 90° apart, starting from the base. The screws cut the thread in the plastic.
Use some antislip-mat under the elevation foot if neccessary.
(For Paulo :) )
__________________________________________________________________________________________________________
Extra Perimeters and extra Top layers and gyroid to improve parts strength.