Triangular Moose BCAR
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mostly cosmetic rework of the MooseSlug BCAR
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 85
- Makes
- 1
- Views
- 915
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Was having good results with Taffert Designs MooseSlug BCAR, but I really wanted that oddball triangular aesthetic - designs of which seem to have largely disappeared off printables/thingiverse/cults.
So I remixed. Yes it's nowhere near as easy to print as Taffert's - I cut away all that wasn't absolutely necessary - and changed the hardware up a bit as I really dislike the pins.
I printed cover face down - to get the texture on the front I wanted - at a cost of yes it'll need supports. I print the main body with the threaded coupler up - So the supported side of the flange is hidden within the cover.
M3 heatset / nutserts, and M3x8 screws to retain the bearings. To clear the collar (You can download that off the original MooseSlug BCAR design) M2x6mm screws are used.
Depending on print settings/nozzle - you might get a small gap in the corner behind the front most bearings; looking for a way to clean that up a bit. Shouldn't affect operation.