1 / 5
NeoPixel Ring 16LED - LCD Monitor mount / Wall housing — image 1
1 / 5

NeoPixel Ring 16LED - LCD Monitor mount / Wall housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a housing to mount the NeoPixel Ring 16LED version. The housing has two holes inside, which allows you to…

Rating
0 / 5
Likes
14
Downloads
108
Makes
0
Views
849
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a housing to mount the NeoPixel Ring 16LED version.

The housing has two holes inside, which allows you to mount it directly to a wall with nails, or you can print the LCD monitor holder to put the ring on top of your LCD monitor.

I use this setup for notifications from my Home Assistant and to show an alert if a person was detected around my house (red LED lights up based on the position of detected person relative to the house).

The LCD monitor mount needs to be printed on it's side (it should load like that) and add a support to the middle part (space for wire).
Make sure the thickness of your LCD monitor is max 2.1cm.

The LED cover of course needs to be printed with a transparent filament (I used PETG) and if the printer is calibrated correctly it should fit snuggly. Of course you don't need to use the cover at all, but it looks better with it :)

There is a ridge inside the housing to seat the ring PCB on, while still leaving a space behind for the wires - I used servo wire.

If you like this, please consider giving it a like and posting your make.

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 20%

Filament: Plasty Mladec PETG 
Any material does the trick.

 

Tags