1 / 7
Edelstahl Seifenspeder Ersatztopf ( soapdispenser pot ) — image 1
1 / 7

Edelstahl Seifenspeder Ersatztopf ( soapdispenser pot )

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ersatz Kunststofftopf für einen "Seifenspender »Boston«, Edelstahl" (Hagebau)

Rating
0 / 5
Likes
1
Downloads
35
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Public Domain

(english version below)

Anwendung:

Das Bauteil dient als Ersatzteil für einen Edelstahl Seifenspender.

Modell “Seifenspender »Boston«, Edelstahl” 

In dem Seifenspender ist ein Kunststoff Topf,  in dem die Seife eingefüllt wird.

Falls euer auch Kaputt geht müsst Ihr nicht die ganze Edelstahl Armatur entsorgen, sondern könnt sie mit diesem Modell retten.

Das 3D Modell ist eine fürs Drucken leicht optimierte Version des Seifentopfes.

Drucktips:

Ich empfehle mindestens oben am Gewinde eine schichthöhe von 0,1mm zu wählen, damit das Gewinde schön sauber ausgeformt wird. (der rest kann auch eine größere Schichthöhe zur Zeitersparnis haben)

Infill habe ich 100% Gewählt (das Modell ist dünnwandig) nur oben am Gewindeteil könnte etwas Füllung erzeugt werden. Diesen bereich wollen wir aber so fest wir mögich haben.

 

Application:

The component serves as a spare part for a stainless steel soap dispenser.

Model "Soap dispenser "Boston", stainless steel".

In the soap dispenser is a plastic pot, in which the soap is filled.

If your soap dispenser breaks down, you do not have to dispose of the entire stainless steel faucet, but can save it with this model.

The 3D model is a slightly optimized version of the soap dispenser for printing.

Printing tips:

I recommend to choose a layer height of 0.1mm at least at the top of the thread, so that the thread is formed nice and clean. (the rest can also have a greater layer height to save time).

Infill I have chosen 100% (the model is thin-walled) only at the top of the thread part could be created some filling. But we want to have this area as solid as possible.

Tags