1 / 2
Clip-on hex bit holder for tools with long 1/4" shafts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A useful and compact clip-on hex bit holder for screwdrivers and other tools with long 1/4" (= 6.35 mm) shafts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A useful and compact clip-on hex bit holder for screwdrivers and other tools with long 1/4" (= 6.35 mm) shafts. It holds in place firmly by friction and allows you to always keep your 10 most used hex bits at hand.
This design is meant for flexible filaments. Scaling the model +-0.69% in the X and Y direction changes the tolerances on the hex bits by +-0.05 mm.
Print settings
- Layer height 0.2 - 0.3 mm
- Line width 0.42 mm
- Infill 25% (starting the infill 13 mm above the bed is sufficient)
- 4 wall lines
- 5 top & bottom layers
- Supports not required
Material has to be flexible / TPU.
Approximate print time @ 30 mm/s: 1:50 h