Argon NEO Top with Raspberry Pi Camera Ribbon Cable Slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement top for the Argon NEO Raspberry Pi 4 case with a slot for the Raspberry Pi Camera ribbon cable.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 79
- Makes
- 1
- Views
- 962
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I was using an Argon NEO case for my Raspberry Pi 4 running Octoprint with my Prusa Mini+ and wanted to use a Raspberry Pi Camera.
Unfortunately, the original case does not provide a nice way to get the ribbon cable out of the case so I decided to design a replacement top for it.
Parts needed:
- 2x Neodymium magnets 10x1mm (optional)
Glue for the magnets (optional) The magnets are required for the top to snap on and hold in place nicely. But you can get by without them if you don't have any.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15%
Filament:
Prusament PLA Galaxy Black
Notes:
Printed on a Prusa Mini+
Print with the top flat on the bed and no supports should be needed.
Post-Printing
Assembling magnets
You can put the magnets on to the spots as indicated in the picture to find out the polarity before you glue them to the case top.
Category: Computer