EK wateblocks reservoir replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a replacement reservoir for older versions of ek waterblocks (multioption) reservoirs for PC watercooling. The…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This a replacement reservoir for older versions of ek waterblocks (multioption) reservoirs for PC watercooling. The original reservoirs tend to crack after some time and this is a quick fix. I would suggest to print with translucent/transparent PETG or you can use PLA if you are sure that water temperatures are staying low. The ends of the reservoir are thicker for added strength while the middle is thinner to allow better viewing of the water inside. Dimensions are 125mm height / 50mm diameter. I include a photo of the original assembled reservoir for reference.
PS. I would suggest to test print at least the thread part to check and adjust printer tolerances.
Category: Computer