1 / 4
PCB Klicky Probe Servo Dock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Servo deployed dock for PCB Klicky probe
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 0
- Views
- 1,037
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Servo deployed dock for the Klicky PCB probe.
This is intended to be mounted on the printer back panel. It was specifically designed to work with my print head (https://www.printables.com/model/609751-orbiter2-rapido2-pcbklicky-printhead-for-sk-go3)
Except for the the printed parts and the klicky probe, you need
- SG90 servo
- about 11mm of 6mm OD PTFE tube or similar low friction material
- 2pc M3 hex nut
- 2pc M3x12 bolts (depending on back panel thickness)
- 2pc M2x6 bolts
- 2pc M2 heat set inserts
Note: At the time of writing, this has been in use for a couple of prints and testing, maybe 150 deploy-stow cycles. No long term experiences yet