1 / 3
Hypercube Evolution Short Bed Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I cut the wrong 2020 extrusion for my bed on my Hypercube evolution 400x400x400 build. This works for the MK2S 400x400…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I cut the wrong 2020 extrusion for my bed on my Hypercube evolution 400x400x400 build.
This works for the MK2S 400x400 3mm heated bed aluminum build plate.
My y axis is approximately 14in / 355mm.
Change the offset parameter in the fusion file for your custom short bracket!
Note: You need a longer screw for the spring bed leveling mount. Also, each bracket requires 3 2020 screws with nuts.
Print in PETG or ABS!
Update 5/20/20:
- Removed the right angle brace as I realised that it is very difficult to use and is not needed structurally.
Category: 3D Printer Parts