1 / 2
1/4 in launch lug for rockets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 1/4 inch launch lug. My first Fusion 360 foray to make something useful. You may have to adjust size…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 88
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This is a 1/4 inch launch lug. My first Fusion 360 foray to make something useful.
You may have to adjust size depending on the tolerances of your printer. I designed the hole to be 6.6mm (1/4 in is 6.35mm)
Print Settings
Printer:
FLSUN QQ-S Pro
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
100%
Filament:
doesnt matter any PLA or PETG Post-Printing =============I don't suggest using Epoxy to attach without significantly roughing up the bonding surface
CA can be a bit brittle for the purpose
I plan on using some Polyurethane Gorilla Glue.
Category: Vehicles