Small planter for succulents
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
This is my take on a succulent planter. The opening for the plant is 68mm in diameter, it has a slight bulge in the actual planter but that's the diameter of the opening. It is around 55mm deep. I've placed some holes for drainage. The plate has small pegs that go in the holes to keep the planter centered, they are small enough that they don't cover the hole and prevent water drainage. The plate is 80mm at the widest spot.
I created it with a .3mm layer height in mind, 2 perimeters, with 4 top solid layers and 3 bottom solid layers on a 0.4mm nozzle.
I've also provided the f3d file in case someone wants to modify it. Remember to post it as a remix!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3 recommended
Infill:
15%
Category: Outdoor & Garden