1 / 4
Colector Card Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box from colector cards.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 85
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Box from colector cards
This box have one card is exposed in front. I use standard hard cover, you cen see in photo but you can use another brand of covers in this side. There are several versions of the box, one for the slim fit cover and the other for the art/big Card Sleeves. I added a photo where you can see it.
Cover Sizes
- Front card Cover - 76 x 101 x 1,6 mm
- Slim fit cover - 65 x 90 mm
- Art/Big card Sleeves - 67 x 92 mm
Box size
- Box size - 85,5 x 106,5 x 77 mm
- Slim foil storage - 72 x 90,8 x 65,2 mm
- Art/Big card Sleeves - 72 x 92,5 x 68 mm
3D printing settings : I use
- Layer height 0.2 mm
- support used only from card slot (support if the support is well built, it can be chosen quite well)
But you can use 0.15mm if you need, but it will take more time.
Until the future
I would like to add a title for the most collected polls such as Pokemon, Magic and ...