1 / 3
The Gravedigger - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a hueforge print that utilises filament swapping at different layer heights.
- Rating
- 4.75 / 5
- Likes
- 119
- Downloads
- 305
- Makes
- 4
- Views
- 1,970
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 15/10/2023:
- Added .stl file to accommodate slicers that can't read the original 3MF file.
This is a hueforge print that utilises filament swapping at different layer heights. An AMS is not necessary, but will be very helpful.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA Sunlu Lilac Transmission Distance: 6.6
- PLA Sunlu Beige Transmission Distance: 8.2
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #7 (0.68mm) swap to Lilac
- At layer #10 (0.92mm) swap to Beige
- At layer #16 (1.4mm) swap to White for the rest.
Category: 2D Art