Instax Frame and Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.60 – €0.74 net (excluding VAT)
For file: instax-tag-keychain-v5-body-plain_0.4n_0.2mm_PLA_MK4IS_27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 27 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An easy print with snap fit to frame your Instax photos. Can be used as a keychain or as a standalone little frame.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 157
- Makes
- 0
- Views
- 685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Instax photos are really cute and make for a nice little present when you meet with friends and family that you dont see in a long time. I designed these little frames to turn an Instax into a little present I can give to my loved ones, and also as a way to keep my favorite ones nicely framed.
The model is composed by two parts: a little tray for the picture and a lid that snatch-fits into the tray border, creating a closed frame with a minimalist look.
The download includes different lids that you can choose mix and match, and two bases, one with a hoop for a keychain and a plain one, without the hoop.
Check the video to see how nicely they fit:
Printing Advice
I recommend using at least 30% infill for these parts, otherwise you'll risk breaking the little tabs that snatch into the base. I used PLA because I had more color options, but I think PETG could be a great choice here.
Make sure to flip the lids so that the top face is printed as first layer. A full set (base + lid) takes approximately 30 minutes to print on the MK4.