Bow Tree Hanger for Hunting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple folding hook for hanging your bow in a tree using a HYS style strap.
- Rating
- 4.5 / 5
- Likes
- 153
- Downloads
- 1,173
- Makes
- 2
- Views
- 5,566
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
****See updated V2!
https://www.printables.com/model/1548234-bow-tree-hanger-for-hunting-v2
Hello!
I use a homemade HYS style strap to hand my backpack and bow from a tree while saddle hunting. I wanted a simple hook to hold my bow secure on the tree but still allow easy grabbing of the bow. Other hunting brands have similar products but this is of my design. Large enough to work on all compound bows and traditional if you so choose. I use a 1in width strap but should work on a ¾" strap too.
Test in a tree on the ground before you trust it in the air!
Hardware:
1x QTY 5/16" - 18 X 1.75" LG SS socket head screw
1x QTY 5/16" - 18 SS locking nut
Printing:
Material: PETG or ASA or other UV resistant filament, I use Atomic PETG + CF which I love!
Layer Height: 0.2mm
Walls: 6
Top and Bottom Layer: 6
Infill: I did 100% with lines pattern, you could probably do 50% but I haven't tested this
Cooling: 0% for best layer adhesion
Supports: None for hook, on for hanger to support holes and strap slot