Jolly Roger from One Piece - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Always appreciate seeing your makes!
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 108
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite Pro Cold White Transmission Distance: 0.5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Army Red
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #22 (1.84mm) swap to Cold White for the rest.
Most important is the Cold White (low transmission distance). Other whites have the potential of coming out with a bit of a yellow tinge. Scaling is fine, but only on the X and Y axis; do not scale the Z.