Angle Test Print
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.52 net (excluding VAT)
For file: Angle Test_0.2mm_PLA_MK3S_1h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.38 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.63 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wanted to test non supported overhang angles.
- Rating
- 4.833 / 5
- Likes
- 43
- Downloads
- 1,076
- Makes
- 9
- Views
- 3,138
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
I wanted to test overhang angles with no support.
I printed 10°, 15°, 30°, 45°, 50° & 60°.
Each is 1/8" thick. The first 4 angles are 1.5 inch long, the last 2 are 1 inch long.